RAVENOL Kompressorenoel PAO VDL 150 is a premium quality compressor oil of the ISO VG Class 150, which is specially designed to extend the service life time of compressors.
RAVENOL Kompressorenoel PAO VDL 150 contains additives, which ensure an excellent wear protection and protects against residue and corrosion (both steel and non-ferrous metal). Most compressors have to work under high temperature so that the used oil has to have a good aging resistance but also a low residue building.
In addition RAVENOL Kompressorenoel PAO VDL 150 conforms to its ISO VG Class and shows a remarkable low evaporative behavior an outstanding demulsifying power as well as excellent air separation ability. It ensures certain lubrication not only in the high temperature range but also in cold condition of the compressor to reach a wear minimisation. By the use of selected and matched additives the tendency of coking and flammable residues is minimized.
Application Note
RAVENOL Kompressorenoel PAO VDL 150 is recommended for all compressors especially in rotary screw air compressors.
Characteristics
- High oxidation stability.
- Excellent protection against rust and corrosion.
- Best wear protection. Keeps compressor components free of sludge and varnish to ensure trouble free operation and lower maintenance costs on fluid change-out.
- Very low evaporative behavior and an outstanding demulsifying power.
- Excellent air separation ability.
- Better resistance to oxidative breakdown.
- Extends oil change intervals up to 8.000 hours service in rotary screw compressors and 1.000 hours service in rotary vane compressors.
- Improves compressor operating efficiency, lower energy consumption costs by reducing of oil thickening.
Характеристики
| Параметр | Значение | Аудит |
|---|---|---|
| Ширина | 255 | |
| Длина | 295 | |
| Высота | 370 | |
| Испаряемость NOACK | 1.32 | ASTM D5800 |
| Brand | RAVENOL | |
| Вязкость | 150 | |
| Плотность при 20°C | 868 | EN ISO 12185 |
| Вязкость при 100°C | 16.1 | DIN 51562-1 |
| Вязкость при 40°C | 146.5 | DIN 51562-1 |
| Индекс вязкости VI | 115 | DIN ISO 2909 |
| Температура застывания | -24 | DIN ISO 3016 |
| Температура воспламенения | 287 | DIN EN ISO 2592 |
| Кислотное число, TAN | 0.14 | ASTM D664 |
| Отделение воды | 41-40-0 (10) | ASTM D1401 |
| Образование пены I при 24°C | 0/0 | ASTM D892 |
| Образование пены II при 93.5°C | 10/0 | ASTM D892 |
| Образование пены III от 24°C до 93.5°C | 0/0 | ASTM D892 |
| Тест на коррозию меди, при 100°C/3ч | 1a | ASTM D130 |
| Ржавление (коррозия) А – дистиллированная вода | пройден | ASTM D665 |
| Ржавление (коррозия) B – синтетическая морская вода | passed | ASTM D665 |
| Потери на испарении % мас.доли | < 0.1 | ASTM D524 |